Mackie ONYX1640 Premium 16Ch Analog Mixer
	Quantity in Basket: none Code: 03205 Price:$1,089.95 In stock and available for immediate shipment!
	Quantity:
The Mackie Onyx series of analog mixers combine the renowned signal performance Mackie is known for, with the convenience of FireWire integration to PC and Mac based workstations. The Onyx 1640 mixer features a total of 16 line inputs and 8 microphone inputs. The line inputs feature balanced 1/4" TRS phone inputs, channels 9 through 16 are stereo paired for adapting keyboards and other stereo output devices. 8 Onyx microphone preamplifier's feature balanced XLR connectors that improve upon the famed XDR preamplifier with delivering exceptional headroom and low noise floor. Four assignable output buses provide adequate channel routing to recorders, monitors, etc. All 16 inputs feature balanced direct outputs via analog D-sub connectors for feeding multi-track recorders, monitor mixers etc. Perhaps the most unique feature is the Fire-Wire I/O expansion card slot. The expansion card allows the mixer to bridge with Fire-Wire equipped computers without any additional hardware. The card is capable of transferring up to 18 channels of 24-bit/96kHz audio. The Mackie Onyx series mixers are at home in project recording and sound reinforcement applications. Key Features FireWire I/O Expansion An optional FireWire I/O card bridges the mixer with computer based software workstations. The optional card will transfer up to 18 channels of 24-bit / 96kHz audio to computers equipped with FireWire I/O. Assignable Buses Four assignable buses are provided on 1/4" phone connections. All channels are assignable to any of the 4 busses, provided adequate routing to recorders, monitors, etc. Direct Outputs Every input features a dedicated direct output for sending audio to multi-track recorders, monitor mixers etc. The direct outputs feature balanced D-Sub type analog connectors. Perkins EQ Every input channel features an enhanced EQ section developed by Cal Perkins. The EQ delivers smooth frequency contouring with minimal phase shift, reminiscent of famous British console EQs. Enhanced Microphone Preamplifiers In an effort to improve upon Mackie's famed XDR microphone preamplifers, the Onyx preamplifiers feature exceptional headroom and improved signal-to-noise ratio while emphasizing sonic detail. Talk-Back Microphone Section An improved monitor section comes complete with talk-back microphone allowing communication between the talent and engineer. Individually Switchable Phantom Power All channels featuring microphone inputs feature individually switched +48V phantom power. The flexibility of individually switched phantom power provides the flexibility of using dynamic and condenser microphone simultaneously. Specifications Total # Of Inputs 16 - Balanced 1/4" TRS Phone Inputs Mic/Line Inputs 8 - Balanced XLR Mic Inputs, 16 - Balanced 1/4" TRS Phone Inputs Stereo Line Inputs 4 - Balanced 1/4" TRS Phone Inputs channels 9 through 16 are stereo paired In-Line Inputs/Returns No AUX Sends 4 - Balanced/Unbalanced switchable 1/4" TRS Phone AUX Returns 4 - Stereo (L/R) Balanced/Unbalanced switchable 1/4" TRS Phone Inserts 8 - 1/4" TRS Phone Pre-Fader/Pre EQ BUS (Group) Outputs Bus Outputs: 4 - 1/4" TRS Phone Direct Outputs: 16 - 2x Balanced D-Sub Connectors (1-8 & 9-16) ALT 3/4 Output: L/R 1/4" TRS Phone 2 Trk Master I/O Main Out: Stereo L/R - Balanced 3-pin XLR-male Main Out: Stereo L/R - Balanced 1/4" TRS Phone ALT I/O Tape Input/Output: L/R RCA-pin Monitor Outputs Control Room: L/R Balanced 1/4" TRS Phone Phones: Single 1/4" TRS Phone EQ Section Mono Channel EQ: High: +/- 15dB @ 12kHz Mid: +/- 15dB, sweepable from 100Hz to 8kHz Low: +/-15dB @ 80Hz Stereo Channel EQ: High: +/- 15dB @ 12kHz Mid: +/- 15dB @ 2.5kHz Low: +/- 15dB @ 80Hz Solo/Mute Solo & Mute On Every Channel signal is automatically routed to ALT 3/4 output while Mute is active Channel Level Control Channel Fader Trim/Gain Control Sealed Rotary Control (POTS) Phantom Power +48V individually switchable Metering 12 Segment Stereo Peak LEDs Frequency Response Mic Input to Main Output (Gain @ Unity) 20Hz to 50kHz +0, -1dB 10Hz to 100Hz +0, -3dB Dynamic Range > 110dB (Mic In to Main Out) Signal-to-Noise Ratio 20Hz to 20kHz Bandwidth, 150 ohm source impedance) Equivalent Input Noise (E.I.N) -129.5 dBu @ +60dB gain Mic Output Noise Recording Output: -100dBu (minimum gain) Residual Output Noise Main Out: -102dBu (Channel and Main Mix levels off) Main Out: -88dBu (Channel and Main Mix levels at unity) Total Harmonic Distortion (THD) Mic Input to Main Output (@ +4 dBu) THD: < 0.01%, 20Hz to 20kHz SMPTE IMD: < 0.005% (7 kHz/ 60 Hz, 4:1) Power Supply Power Consumption: < 55 watts Universal AC Power Supply: 100VAC - 240VAC, 50 - 60Hz Dimensions 17.3 x 20.3 x 6.6" (440 x 516 x 167mm)(WxHxD) Weight 22.0 lb (10 kg) Manufacturer Warranty 3 Years

All products at eTailElectronics are covered by the full manufacturer warranty.